Title
THE INFLUENCE OF PARAMETERS OF HEAT TREATMENT ON THE MICROSTRUCTURE AND STRENGTH PROPERTIES OF THE ADI AND THE AVGI IRONS
Authors
[ 1 ] Wydział Techniczny, Akademia im. Jakuba z Paradyża | [ P ] employee
Scientific discipline (Law 2.0)
Year of publication
2021
Chapter type
chapter in monograph / paper
Publication language
english
Keywords
EN
- Nodular cast iron, vermicular cast iron, austempering, AVGI, ADI
Abstract
EN The paper presents the results of investigation concerning the strength properties of the vermicular and the nodular cast iron both in the as-cast state and after the heat treatment held according to a couple of various options. The nodular cast iron exhibited almost 100% nodular graphite precipitates and the purely pearlitic matrix. The graphite precipitates in the vermicular cast iron were almost 100% vermicular ones, embedded in the pearlitic-ferritic matrix (50%/50%). The heat treatment of the examined cast iron types differed with respect to the temperature. The austenitization process was performed either at 900°C or at 960°C, while austempering was held either at 290°C or at 390°C. Both the austenitizing and the austempering time was constant and set to 90 min. Both the as-cast specimens and the heat-treated ones were subjected to mechanical testing which allowed to determine their properties, namely Rm, Rp0,2, A5, and hardness. The change of the initial matrix to the ausferritic one resulted in the increase in mechanical properties, however the results were diversified depending on the type of graphite precipitates occurring in the material.
Date of online publication
09.2021 (Date presumed)
Pages (from - to)
34 - 39
License type
CC BY (attribution alone)
Open Access Mode
other
Open Access Text Version
final published version
Release date
09.2021 (Date presumed)
Date of Open Access to the publication
at the time of publication
Ministry points / chapter
5
This website works thanks to the software SINUS
created by Poznan Supercomputing and Networking Center
Log in to submit to SIS: